Specification builder · Tier A
Obstetric delivery / birthing bed (manual hydraulic or electric, including labour-delivery-recovery beds) with adjustable backrest, Trendelenburg tilt, removable or retracting leg section and padded leg supports
A delivery bed holds the mother safely during labour and birth and converts to the delivery (lithotomy) position by lowering or removing the leg section, with padded leg supports, an adjustable backrest and head-down tilt for emergencies. Every labour room in Pakistan needs one, from BHUs and RHCs (usually manual hydraulic beds) to DHQ, teaching and private hospitals (electric delivery or labour-delivery-recovery beds). The key tender decisions are manual versus electric, a backup battery and quick backrest release for load-shedding and emergencies, firm leg supports, a fully waterproof sectional mattress and reliable after-sales service.
What this equipment will do
- Women in labour and during vaginal birth, including assisted delivery and repair of tears, on a bed with declared safe working load of at least 150 kg (manual) or 200 kg (electric).
- Delivery (lithotomy) position: leg section lowered, removed or retracted with padded, adjustable leg holders.
- Backrest adjustment for semi-sitting labour and pushing, and Trendelenburg (head-down) tilt of at least 10 deg for cord prolapse, haemorrhage and shock.
- Works without electricity: hydraulic foot-pump height and mechanical controls. (with the optional module)
- Motorised height, backrest and tilt from a sealed hand control, so one midwife can reposition the mother (electrical safety per IEC 60601-1). (with the optional module)
- Labour, delivery and recovery on the same bed without moving the mother. (with the optional module)
- Upright and supported pushing positions with calf supports, foot rests and patient grab handles. (with the optional module)
- Keeps moving during load-shedding on a built-in backup battery. (with the optional module)
- Fast flattening of the backrest by hand for resuscitation, eclampsia or collapse. (with the optional module)
- Protection of a drowsy, sedated or fitting mother with lockable folding side rails. (with the optional module)
- Collection of blood, fluids and placenta in a removable stainless steel tray. (with the optional module)
- Quick move to theatre for emergency caesarean section on large centrally locking castors. (with the optional module)
Not covered: Caesarean section and other operations need an operating table (IEC 60601-2-46) in the theatre, not a delivery bed.; Fetal heart and contraction monitoring needs a cardiotocograph (CTG) or fetal Doppler; the bed only positions the mother.; Newborn resuscitation and warming need a newborn resuscitation unit or infant radiant warmer next to the bed.; Long-stay postnatal or ICU care of a very sick mother needs a ward or ICU bed with side rails, pressure-relieving mattress and scale.
Loading the builder...
Standards this specification draws on
- IEC 60601-1 General electrical and mechanical safety of medical electrical equipment; applies to electrically operated delivery and LDR beds (leakage current, moving-part crushing, stability).
- IEC 60601-1-2 Electromagnetic compatibility of electric beds, so the motors and controls neither disturb nor are disturbed by CTG, monitors and phones.
- IEC 60601-2-46 Particular requirements for operating tables (2023 edition); used by UN procurement agencies as the reference for electric gynaecology / delivery tables for stability, load and tilt safety.
- ISO 14971 Risk management, covering hazards such as falls, leg holder failure, crushing, tipping in Trendelenburg and loss of movement in a power cut.
- ISO 13485 Quality management system of the manufacturer.
- IEC 60529 Ingress protection (IP code) of actuators, control box and hand control against blood, amniotic fluid and cleaning.
- IEC 62353 Electrical safety testing of electric beds at installation, after repair and at preventive maintenance.
- DRAP Medical Devices Rules 2017 Registration/enlistment required to import and sell medical devices in Pakistan.
Common mistakes in tenders for this equipment
- Copying one brand's brochure: exact height range to the millimetre, a fixed number of motors or a named mattress technology. Use 'not less than / not more than' ranges and a declared safe working load instead.
- Asking for 'electric delivery bed' for a BHU or RHC with long power cuts and no technician; a good manual hydraulic bed is safer and cheaper there.
- Leaving out leg holders, collection tray, IV pole and spare mattress covers so the cheapest bid arrives without them; these are the parts that wear out first.
- Accepting a mattress with stitched or fabric covers that soak up blood and amniotic fluid; covers must be waterproof, seam-sealed and chlorine-resistant.
- Citing the hospital-bed standard as if it fully covers delivery beds; ask instead for IEC 60601-1 test reports for electric beds and a declared safe working load and stability test for every bed.
- Not testing battery operation and manual backrest lowering at installation; a flat or disconnected battery is often found only during an emergency.
- Ignoring castor brakes: a bed that rolls during the birth is dangerous; require brakes on at least two castors or central locking.
