USP L89 column: Polymethacrylate SEC, water-soluble polymers (MW ~100-3000)
Size-exclusion packing on cross-linked polymethacrylate resin for water-soluble neutral and anionic polymers of about 100-3000 Da (polyethylene oxide calibration).
Mode: size-exclusion Typical pH range: wide, roughly 1-13 (polymer base)
Typical uses
- Low molecular weight PEGs and oligomers
Common sizes (length x internal diameter, particle size)
- 300 x 7.8 mm, 5-8 um
- 300 x 7.5 mm, 10-13 um
Tender wording (brand-neutral)
HPLC column with USP L89 packing (Polymethacrylate SEC, water-soluble polymers (MW ~100-3000)), 300 x 7.8 mm, 5-8 um (length x internal diameter, particle size); stainless-steel or equivalent hardware with standard fittings; recommended pH and temperature range to be stated by the bidder; each column supplied with its certificate of analysis and test chromatogram, batch/lot number and serial number; shelf life not less than 2 years from delivery; any make meeting the USP L89 designation and the stated dimensions is acceptable.
Size:
Changing length or particle size
You can keep the USP L89 packing and use a different length, particle size or diameter within the harmonized USP 621 limits. Check your columns with the calculator.
Related column types
L25 Polymethacrylate SEC, water-soluble polymers (MW ~100-5000) | L33 SEC silica for dextrans (4-500 kDa) | L39 Hydrophilic polyhydroxymethacrylate gel (SEC) | L59 Protein SEC on coated silica/hybrid (5-7000 kDa)
Not sure this is the right column? Use the step-by-step column selector.